Loa Martin Brother WF12 Bass 30 là mẫu loa karaoke được hãng TD ACOUSTIC thiết kế rất trau chuốt đến từng chi tiết. Đem lại sử trải nghiệm âm thanh chuyên nghiệp nhất, hiện đại nhất.
Vỏ loa được thiết kế hình thang đứng làm bằng chất liệu gỗ bạch dương nhập khẩu từ Nga độ dày 15mm, được phun một lớp sơn sần màu đen bóng nhằm kích thích người dùng khi sờ lên bề mặt loa và đảm bảo chất lượng âm thanh tốt cho loa.
WF12 được trang bị loa Bass có kích thước 30 cm và coil 76 và 1 treble kèn rất phù hợp với không gian 30m trở xuống. Các giải tần âm thanh của loa luôn giữ được 1 khoảng cách cố định cho chất âm sáng hơn.
CHI TIẾT CẤU TẠO LOA Martin Brother WF12
Ngoại thất
- Vỏ loa được thiết kế bằng chất liệu gỗ Bạch dương nhập khẩu từ Nga với độ dày 15mm
- Màng bảo vệ mặt trước được thiết kế bằng chất liệu thép từ công ty lớn nhất TG, đây là nhà cung cấp thép cho các cở sở nổi tiếng như: RCF và B&C ( Italy ),… Với độ từ tính rất cao và độ bền lâu.
- Xương loa lục lăng được làm hoàn toàn bằng nhôm
- Ốc vít của loa được thiết kế bằng thép nhập khẩu tại Nhật bản ( JAPAN )
- Loa được phủ bằng sơn hãng Polyurea PMC của Mỹ công nghệ sơn 4 lớp
- Keo dán được nhập khẩu tại Malaysia
Nội thất
- Côn Bass 75mm dây đồng – Côn Treble 44mm làm bằng nhôm dẹt chịu nhiệt tốt được nhập khẩu nguyên chiếc tại Malaysia
- Màng Bass nhập khẩu của hãng UKM tại Anh (England)
- Dây được thiết kế từ hãng LeiTing công nghệ của Mỹ
- Bông trung và sợi thủy tinh hấp thụ âm thanh thiết kế 2 lớp tiêu chuẩn
Loa được kiêm tra kỹ lưỡng, âm thanh được thử nghiệm và thông qua hệ thống phần mềm KLIPPEL của Đức và được thử nghiệm thành phẩm KCS theo tiêu chuẩn chất lượng DAAS.
Thông số kỹ thuật
Company | Martin Brother |
Serial | WF12 |
Frequency Response | 40Hz – 20KHz (± 3dB) |
Axial Sensitivity | 96 dB |
Impedance | 8Ω |
Dimensions | 360 (W) x 611 (H) x 419 (D) mm |
Weights | ~28 kg |
Long-Term EIA | 500W |
Short-Term peak | 1000W |
Calcalated Maximun SPL Output | 126 dB Long-Term, 129 dB peak |
TECHNICAL SPECIFICATIONS ( Thông tin sản phẩm )
Type: Compact, two way passive system,
Drivers: 1x 12″ (300mm) / 2.5″ (63.5mm) bass driver,
1” (25mm) exit HF compression driver
Frequency response: 40Hz – 20kHz ±3dB
Rated Power: 500W AES, 1000W peak
Impedance: 8 ohms
Sensitivity: 96dB,
Maximum SPL: 126 dBcontinuous, 129 dB peak
Connector: 2 x Neutrilk NL4
Protective Grille: Black perforated steel
Dimensions: (W) 360 mm * (H) 611 mm * (D) 419 mm
Weight: 28kg
The TD series has become the standard for regional sound companies, rental professionals, and contractors who want compact high-performance loudspeakers with concert grade T.D Acoustic components. T.D Acoustic looks great stacked, on poles, as monitors or flown with simple, integrated, 12 x M 8 internal rigging points, Our powerhouse H large-format driver provides the high-frequency engine. The combination of high-level components, unique design, and versatility make TD series one of the best values in the industry.
General Product Description
The TD-12Ultra is a two-way, full-range loudspeaker system that incorporates a 12-inch woofer and a 1.73-inch voice coil compression driver on a symmetrical 90-degree x 75-degree fully The five-sided cabinet design allows this main TD system cabinet to easily conform to duties as a monitor or to be tucked tightly against a ceilingfor low-profile applications. The fully rotatable horn means regardless of cabinet position, pattern control is fully user-determined. The TD-12Ultra is a good solution for small-to-medium size rooms as a main TD, providing moderate levels with good bass response in music or speech reproduction for DJs or live bands.
Architects’ and Engineers’ Specifications
The two-way, full-range loudspeaker system shall incorporate one 12-inch transducer with a cast aluminum basket as the LF component and one 1.73-inch diameter voice coil/diaphragm compression driver as the HF component. The compression driver shall be mounted on a 90-degree x75-degree symmetrical constant directivity horn. The horn shall be constructed of a material and design so as to be capable,structurally of supporting the HF driver without anyinternal braces or suspension allowing a full 360-degree rotation of the horn.
The enclosure shall be vented and tuned for optimum low-frequency extension. Input connections shall be accommodated with two paralleled NL4 female Speak one connectors. Loudspeaker system frequency response shall be no less than 40 Hz to 20 kHz ( 3 dB) measured on axis. The loudspeaker shall produce a sound pressure level (SPL) of 96dB on axis at 1 meter with a power input of 1 watt and shall be capable of sustaining a full power, long term average output of 122dB on axis at 1 meter. The full-range system with passive network engaged shall handle 600 watts of amplifier power long term in compliance with AES-EIS standards and have a nominal impedance of 8 ohms.